Getting started with your Lumens Document Camera

Connecting your document camera

Your document camera should already be connected to your projector, and a cable for connecting your computer (so that you can project your computer screen) should have been left with it.  If not, create a ticket and we'll take care of it.

Turning it on

To turn on your document camera, press and hold the power button until the light flashes and turns blue (or is it green?)

Switching between your document camera and your computer

If your document camera is set up in such a way that it is connected in between your computer and your projector, then you can switch between having your computer screen projected and having the camera projected.

1. Make sure your computer is on and the  display adapter and cable are connected properly.
2. Press the "Source (Enter)" button to switch between the two inputs.  Be patient as the projector adjusts between the two input sources.

To reduce or enlarge the image from your document camera (zoom):

1. Press the "+Zoom" button to zoom in.
2. Press the "-Zoom" button to zoom out.

Adjusting the focus of your document camera

Your document camera is auto-focusing, but if you find that it needs some help, you can force it to re-focus by pressing the silver button on the side of the goose-neck: